2 sets of YG sheet pile driver for excavator were exported to the Philippines this week. Below is the feedback from our client:
What this client says?
The excavator mounted vibratory hammer can can drive 8 meters in 3 minutes. Whether you're working on a small-scale residential project or a large-scale construction site, this pile hammer will undoubtedly enhance your productivity and deliver exceptional results.
What is a excavator pile driver?
Excavator pile drivers are mainly used for piling. The types of piles include pipe piles, steel sheet piles, steel pipe piles, precast concrete piles, wooden piles and photovoltaic piles driven on water. They are particularly suitable for medium and short pile projects such as municipal engineering, bridges, cofferdams, and building foundations.
What are the features of the excavator mounted vibro hammer?
1. It can drive and pull out steel sheet piles, cement piles, iron plates, H-steel and steel pipes.
2. The operation between driving and pulling out piles can be quickly switched.
3. It is applicable to all mainstream excavator brands on the market.
4. It will not damage the top or bottom of steel pipe piles, steel sheet piles and rail piles.
5. Since the operation is quiet and the construction period is short, it helps to overcome environmental protection issues.
6. It can meet the needs of various different work sites.
How to operate the pile driver attachment for excavator?
1. Personnel norms.
Excavator pile driver operators must be familiar with the structure, performance, operating instructions and safety precautions of the machine. Only after passing the examination and obtaining the certificate of qualification can they operate alone, so as to promptly solve emergencies in the construction process and reduce or avoid mechanical failures or project delays caused by mechanical problems.
When the excavator pile driver is working, the staff should exchange operation signals with each other in advance. Before the excavator pile driver works, other personnel not related to the work must stay away from the site. In addition, excavator pile driver operators must be familiar with the construction process before construction to ensure the rapid and efficient construction process.
2. Environmental attention.
Operations should be stopped in bad weather. When the wind force is greater than level 7, the pile driver should be parked facing the wind, the pile hammer should be lowered, and a windproof cable should be added. If necessary, the pile frame should be put down. The pile driver should have lightning protection measures, and personnel should stay away from the pile driver in case of lightning.
3. Mechanical operation specifications.
When using an excavator pile driver, the pile cap and liner that are suitable for the pile type, pile frame and pile hammer should be used. If any damage is found, it should be corrected or replaced in time; during use, the pipe joints and oil pump fastening bolts with pressure vibration should be checked to ensure that there is no oil or air leakage; the excavator pile driver must be directed by a dedicated person when walking, and pay attention to avoid dangerous areas such as high-voltage lines and puddles to avoid mechanical damage due to accidents.
4. Maintenance specifications, strictly follow the instructions to perform corresponding maintenance.
After the excavator pile driver is used for construction, wear and tear is inevitable. However, in order to ensure its normal performance and extend the service life of the machine, post-use maintenance is extremely important.
