Jan 20, 2024 Leave a message

How To Protect Hydraulic Pump With Crushing Hammer in Excavator

Because the crushing hammer is a reciprocating rapid impact movement, the oil return speed is fast and the relative pulse is large, resulting in the aging speed of hydraulic oil, so it is necessary to correctly maintain the excavator, and proper use can effectively extend the service life of the hydraulic system.

 

1, the use of high-quality crushing hammer (with accumulator)
Analysis: Due to the design, manufacturing, inspection and other links are prone to problems, the failure rate is high in use, and it is more likely to cause damage to the excavator;

 

2, appropriate engine speed (medium throttle)

Analysis: Due to the low working pressure and flow requirements of the crushing hammer (such as 20-ton excavator, working pressure of 160-180KG, flow of 140-180L/MIN), medium throttle can work; If the large throttle work will not only increase the intensity of the strike but also cause abnormal heating of the hydraulic oil, it will also hurt the hydraulic system;

 

3, correct, beat butter posture, frequency, quantity
Be sure to replenish the lubricating grease in the straight pressed state of the steel, and fill once every 2 hours

Analysis: If the lubrication oil is added in the state of steel suspension, the oil will enter the percussion chamber, and the abnormal high pressure oil will enter the hydraulic system and damage the hydraulic pump.

 

4. Hydraulic oil quantity and pollution status

Analysis: Since hydraulic oil pollution is one of the main causes of hydraulic pump failure, the pollution of hydraulic oil should be confirmed in time. (600 hours to replace hydraulic oil, 100 hours to replace core)

Lack of hydraulic oil will produce cavitation phenomenon, resulting in hydraulic pump failure, crushing hammer piston cylinder body strain; Recommendation: Check the oil level before use every day;

Send Inquiry

whatsapp

Phone

E-mail

Inquiry