Sheet Metal Roller Bending Machine
| Model | Max bending thickness | Roller working length | Motor power | Sheet yield strength |
| W12-4*2000 | 4mm | 2050mm | 3kw | 245Mpa |
| W12-10*2000 | 10mm | 2050mm | 7.5kw | 245Mpa |
| W12-25*2000 | 25mm | 2550mm | 18.5kw | 245Mpa |
| W12-25*3000 | 25mm | 3100nn | 22kw | 245Mpa |

A sheet metal roller bending machine is the unsung hero of modern fabrication. Designed to roll flat metal sheets into curved forms like cylinders, arcs, or custom profiles, it's a staple tool in industries ranging from construction to automotive to sculpture.
At its core, it uses a series of rollers (usually three or four) that apply pressure and guide the sheet into a curved shape. Whether you're working with stainless steel, mild steel, aluminum, or copper, this machine makes bending look easy.
Key Benefits of Using One in Your Shop
Precision Curves, Every Time: Get perfect radii with repeatable accuracy.
Speed Up Fabrication: Cut hours off manual forming tasks.
Reduce Waste: Controlled bends mean fewer mistakes.
Versatile Output: Produce everything from tight cylinders to broad arcs.
Minimal Labor: One operator can do the work of three.

How Does a Roller Bending Machine Work?
Load the Metal Sheet: Place the sheet between the rollers.
Adjust the Rollers: Set the top or side roller to define the radius.
Begin Rolling: The rollers rotate and feed the sheet forward.
Form the Shape: Pressure and motion curve the metal to spec.
Fine-Tune or Repeat: Need tighter curves? Roll it again.
This streamlined process reduces human error, speeds up output, and guarantees precision.
Frequently Asked Questions
1. What is the difference between 3-roll and 4-roll machines?
A 3-roll machine is great for most standard curves, while a 4-roll system offers tighter control and easier prebending.
2. Can I roll cones with this machine?
Absolutely. YG machines feature adjustable side rolls for cone rolling.
3. How thick of a sheet can I bend?
Models are available for 1mm up to 25mm thickness. Custom machines can go even further.
4. What materials can I bend?
Mild steel, stainless steel, aluminum, brass, copper - basically anything you can weld.
5. Do you provide training?
Yes. YG offers remote support, documentation, and on-site training depending on location.
Hot Tags: sheet metal roller bending machine, China sheet metal roller bending machine manufacturers, suppliers, factory, front end loaders, light duty drilling rig, drilling rig service, pavers, drilling rig storage, high speed drilling rig
You Might Also Like
Send Inquiry













