When our mini excavator needs to be transferred, we need to transport the mini excavator to the destination. Our small crawler excavator is not a machine that can walk on the road for a long time, because it will cause damage to the machine. Therefore, it is necessary to carry out lifting and loading at the time of transportation to transport to the destination, but in these processes, we need to pay attention to a lot of things, so we need to pay extra attention
Before the micro excavator needs to be transported, we must first lift the micro excavator for loading. During the lifting process, no one should ensure that the steel rope we lift can withstand the weight of the excavator, and at the same time, the center of the micro excavator will be stabilized during the lifting process once the center is unstable, it will rotate during the lifting process. In the process of lifting, the rotary body of the upper part of the engine is started. At this time, the equipment of the micro excavator will be on the ground to thread the steel rope on the front and rear axle of the micro excavator.
Next, the mini excavator is loaded. In the process of loading, the mini excavator is first parked in the designated position, and then the dozer is lowered to pull out the engine so as to pull out the key. Then the bucket and the bean dry oil cylinder are all extended to lower the boom, so as to maintain the stability of the mini excavator and avoid rollouts during transportation. When loading and transporting, it is necessary to pay attention to the place of the bucket and the cylinder to place the square wood each other especially to avoid the damage caused by the car body in the process of transportation.
When the mini excavator is transported to the destination, it needs to be unloaded. During unloading, we should be extra careful to run the generator of the mini excavator at a low speed and walk slowly. Keep a certain distance between the trailer and the mini excavator and load and unload the mini excavator with the help of slopes or platforms. Do not change direction during unloading and if you want to change direction be sure to correct the direction when coming down the ramp. Such careful operation is to ensure that the mini excavator is not damaged to ensure the personal safety of our operators.
